23113-yq01 对接文档

传感器简介

yq01 三相电表 + 单相微断组合采集，Modbus RTU 协议经 EdgeBus DTU 接入，老版本固件（SwVersion=30），地址与周期硬编码

项目	值
项目名称	YQ-23113-yq01
厂商	YQ (yq01 方案)
型号	yq01
业务代码	23113
对接模式	edgebus-dtu
协议	modbus-rtu

模型清单

可使用下列名称或 ID 在 ThinkLink 中搜索对应模型。

模型类型	名称	id_name	平台模型 ID
Template	yq01		111755055119364096
Thing Model	[YQ01-EMETER]	yq01_emeter_23113	111754943219527680
Thing Model	[YQ-23113-yq01资产] 区域聚合	yq01_emeter_asset_23113	119677189950959626
Thing Model	[YQ01-MCB]	yq01_mcb_23113	111754943676706816

产品特点与适用范围

本项目面向“三相电表 + 单相微断组合采集（Modbus RTU, SwVersion=30）”场景。能力边界、字段和可部署模型均以当前 descriptor、requirements 与模型源文件为准。

部署与采集信息

| DTU | Not applicable | | 供电 | ac | | LoRaWAN Class | C | | 接口 | RS-485 | | 波特率 | 9600 |

遥测与寄存器定义

字段	名称	类型	单位	地址/来源	说明
voltage_a	A相电压	uint16BE	V	reg100 (emeter) / reg256 (mcb)	电表A相电压（×0.1V）；微断A相电压（×0.01V）
voltage_b	B相电压	uint16BE	V	reg101	电表B相电压（×0.1V）
voltage_c	C相电压	uint16BE	V	reg102	电表C相电压（×0.1V）
current_a	A相电流	uint32-lohi	A	reg111(低)+reg112(高) emeter / reg259(高)+reg260(低) mcb	电表：(reg112<<16\|reg111)×0.001A；微断：(reg259<<16\|reg260)×0.01A
current_b	B相电流	uint32-lohi	A	reg113(低)+reg114(高)	电表B相电流（×0.001A）
current_c	C相电流	uint32-lohi	A	reg115(低)+reg116(高)	电表C相电流（×0.001A）
active_power	总有功功率	int32-lohi	W	reg128(低)+reg129(高,signed) emeter / reg281(高)+reg282(低) mcb	电表：(reg129<<16\|reg128)×0.1W；微断：(reg281<<16\|reg282)×0.01kW
energy_import	正向总有功电能	uint32-lohi	kWh	reg400(低)+reg401(高) emeter / reg770(低)+reg771(高) mcb	(高位<<16\|低位)×0.01kWh
run_status	运行状态	uint16BE		reg515 (mcb only)	微断运行状态寄存器

参数定义

无项目专用参数定义。

Requirements 证据

以下关键事实由 requirements 源文件提取；原始行号用于复核。

类别	来源事实	来源
协议/数据	yq01 是三相电表 + 单相微断的组合采集方案，通过 Modbus RTU 协议连接到 EdgeBus DTU（SwVersion=30）。	requirement/requirements.md:5
协议/数据	- 485 地址硬编码在 EB 代码中，不支持通过平台 set/get para 修改	requirement/requirements.md:10
协议/数据	- 波特率：9600	requirement/requirements.md:15
协议/数据	\| 寄存器 \| 名称 \| 格式 \| 系数 \| 单位 \|	requirement/requirements.md:22
协议/数据	> 32位值字节序：低位寄存器地址较小，存放低16位；高位寄存器地址较大，存放高16位。	requirement/requirements.md:38

EdgeBus 代码

以下为当前使用的 EdgeBus 业务代码。

typescript

import { Buffer } from "buffer";
import { buildOtaFile } from "@EBSDK/run";
import { EBModel } from "@EBSDK/EBCompiler/EBModel/EBModel";
import { EventInfoItem } from "@EBSDK/EBCompiler/plugins/EBHelper";
import type { UserConfUPItem } from "@EBSDK/EBCompiler/plugins/EBHelper";
import { CheckbitEnum, getOtaConfig } from "@EBSDK/otaConfig";

// ===== 用户配置区（按实际接线填写，每路设备调用一次）=====
const MODBUS_TT = (ebModel: EBModel) => {
    readEmeter("0x01", "900s")
    readMCB("0x02", "900s")
    // readEmeter("0x03", "900s")
    // readMCB("0x04", "900s")
    return JSON.stringify(ebModel, null, 2)
}
// =======================================================

const otaConfig = getOtaConfig({
    BaudRate: 9600,
    StopBits: 1,
    DataBits: 8,
    Checkbit: CheckbitEnum.NONE,
    Battery: false,
    ConfirmDuty: 60,
    BzType: 23113,
    BzVersion: 1,
    SwVersion: 30,
})

function readEmeter(addr: string, period: string): void {
    const event: UserConfUPItem = {
        name: `emeter_${addr}`,
        port: 22,
        version: "0x87",
        dataType: "0x02",
        upPeriod: period,
        quInfo: [
            // A/B/C 相电压 reg100-102
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: false,
                listVal: [{ start: "100", end: "102" }]
            },
            // A/B/C 相电流（低高各2寄存器）reg111-116
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: false,
                listVal: [{ start: "111", end: "116" }]
            },
            // 总有功功率（低/高）reg128-129
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: false,
                listVal: [{ start: "128", end: "129" }]
            },
            // 正向总有功电能（低/高）reg400-401
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: true,
                listVal: [{ start: "400", end: "401" }]
            },
        ]
    }
    const item = new EventInfoItem(event)
    item.upEventSetup()
    item.eventInstall()
}

function readMCB(addr: string, period: string): void {
    const event: UserConfUPItem = {
        name: `mcb_${addr}`,
        port: 22,
        version: "0x87",
        dataType: "0x03",
        upPeriod: period,
        quInfo: [
            // A 相电压 reg256
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: false,
                listVal: [{ start: "256", end: "256" }]
            },
            // A 相电流（高/低）reg259-260
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: false,
                listVal: [{ start: "259", end: "260" }]
            },
            // 总有功功率（高/低）reg281-282
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: false,
                listVal: [{ start: "281", end: "282" }]
            },
            // 运行状态 reg515
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: false,
                listVal: [{ start: "515", end: "515" }]
            },
            // 正向总有功电能（低/高）reg770-771
            {
                protocol: "modbus", addr, code: "0x03", period, isLast: true,
                listVal: [{ start: "770", end: "771" }]
            },
        ]
    }
    const item = new EventInfoItem(event)
    item.upEventSetup()
    item.eventInstall()
}

buildOtaFile(import.meta.url, otaConfig, MODBUS_TT)

物模型与 RPC 代码

Thing Model: [YQ01-EMETER]

id_name: yq01_emeter_23113 · ID: 111754943219527680

javascript

import { Buffer } from 'buffer'
import {PayloadParser, RPCHelper} from '#tklHelper'

function payload_parser(device, msg, thingModelId, noticeAttrs, org_params) {
    let frameInfo = {
        port: 22,
        dataLen: 33,
        rssi: true,
        status: 3,
        battery: 4,
        tagList: [
            { index: 0, tag: 0x87 },
            { index: 1, tag: 0x02 }
        ]
    }
    let appInfo = [
        { name: "A相电压", field_name: "voltage_a", unit: "V",   index: 6,  type: "uint16be", decimal: 1, coefficient: 0.1 },
        { name: "B相电压", field_name: "voltage_b", unit: "V",   index: 8,  type: "uint16be", decimal: 1, coefficient: 0.1 },
        { name: "C相电压", field_name: "voltage_c", unit: "V",   index: 10, type: "uint16be", decimal: 1, coefficient: 0.1 },
    ]
    let payParser = new PayloadParser({ device, msg, frameInfo, appInfo })
    let tdata = payParser.telemetry()
    if (tdata === null) return null
    if ((tdata?.status & 0x02) === 0x02) {
        const status = tdata.status
        tdata = { ...(device.telemetry_data?.[thingModelId] ?? {}) }
        tdata.status = status
        tdata._modelName = "yq01_emeter_23113"
        return { telemetry_data: tdata, server_attrs: null, shared_attrs: null }
    }

    const buf = Buffer.from(msg?.userdata?.payload, "base64")

    // A相电流：低位reg111[12..13]，高位reg112[14..15]
    tdata.current_a = Number(((buf.readUInt16BE(14) * 65536 + buf.readUInt16BE(12)) * 0.001).toFixed(3))
    // B相电流：低位reg113[16..17]，高位reg114[18..19]
    tdata.current_b = Number(((buf.readUInt16BE(18) * 65536 + buf.readUInt16BE(16)) * 0.001).toFixed(3))
    // C相电流：低位reg115[20..21]，高位reg116[22..23]
    tdata.current_c = Number(((buf.readUInt16BE(22) * 65536 + buf.readUInt16BE(20)) * 0.001).toFixed(3))
    // 总有功功率：低位reg128[24..25]，高位reg129[26..27]（有符号）
    tdata.active_power = Number(((buf.readInt16BE(26) * 65536 + buf.readUInt16BE(24)) * 0.1).toFixed(1))
    // 正向总有功电能：低位reg400[29..30]，高位reg401[31..32]
    tdata.energy_import = Number(((buf.readUInt16BE(31) * 65536 + buf.readUInt16BE(29)) * 0.01).toFixed(2))

    tdata._modelName = "yq01_emeter_23113"
    let result = { telemetry_data: tdata, server_attrs: null, shared_attrs: null };
    if (result.telemetry_data && typeof result.telemetry_data === "object") result.telemetry_data.adr = msg?.userdata?.adr ?? null;
    // ── rpcHook (设备对接通用规则) ──
    if (typeof RPCHelper.buildRpcHookAction === "function") {
      const __a = RPCHelper.buildRpcHookAction({ device, msg, thingModelId, idName: "yq01_emeter_23113", name: "[YQ01-EMETER]", parsed: { telemetry_data: result.telemetry_data, server_attrs: result.server_attrs, shared_attrs: result.shared_attrs } });
      if (__a) { result.actions = result.actions || []; result.actions.push(__a); }
    }
    return result;
}

console.log(payload_parser(
    {},
    {
        "if": "loraWAN",
        "gwrx": [{ "eui": "5a53012a000007da", "chan": 0, "lsnr": -6.8, "rfch": 1, "rssi": -98,
                   "time": "2026-05-26T10:00:00.000Z", "tmms": 0, "tmst": 0, "ftime": 0 }],
        "type": "data", "token": 1,
        "moteTx": { "codr": "4/5", "datr": "SF7BW125", "freq": 924.2, "modu": "LORA", "macAck": "", "macCmd": "" },
        "geoInfo": { "type": "gw:ip", "accuracy": 10000, "altitude": 0, "latitude": 22.36497, "longitude": 114.12677 },
        "moteeui": "0000000000000001",
        "version": "3.0",
        "userdata": {
            "adr": false, "port": 22, "class": "ClassC", "seqno": 1,
            "payload": "hwIAAAABCPwI/Aj8AfQAAAH0AAAB9AAASwAAAAAD6AAA",
            "confirmed": false
        }
    },
    "1",
    { telemetry_data: true },
    {}
))

Thing Model: [YQ-23113-yq01资产] 区域聚合

id_name: yq01_emeter_asset_23113 · ID: 119677189950959626

javascript

import {PayloadParser, RPCHelper} from '#tklHelper';

// 资产(VIRTUAL)聚合物模型 — 通用 agg_spec 驱动聚合器，见 docs/references/workflow/asset-aggregation-model.md
// device=资产, msg=源设备快照, thingModelId=本物模型ID, noticeAttrs=变更标记。
// 聚合规格在资产 server_attrs.agg_spec：zone_voltage_a_avg=空间均值(voltage_a)；zone_voltage_b_avg=空间均值(voltage_b)；zone_voltage_c_avg=空间均值(voltage_c)；zone_current_a_sum=时点累加(current_a)；zone_current_b_sum=时点累加(current_b)；zone_current_c_sum=时点累加(current_c)；zone_active_power_sum=时点累加(active_power)；zone_energy_import_sum=谨慎累加(energy_import)；min_battery=取最小(battery)；min_rssi=取最小(rssi)；min_snr=取最小(snr)；online_count=在线数(—)
function payload_parser(device, msg, thingModelId, noticeAttrs) {
    if (!noticeAttrs || !noticeAttrs.telemetry_data) {
        return { telemetry_data: null, server_attrs: null, shared_attrs: null };
    }
    const sa      = device?.server_attrs || {};
    const spec    = sa.agg_spec || {};
    const members = { ...(sa.members || {}) };
    const staleMs = sa.stale_ms != null ? sa.stale_ms : 600000;
    const now     = (typeof Date !== "undefined" && Date.now) ? Date.now() : null;

    // 合并源设备各物模型的最新快照为一个扁平对象
    const srcTd = {};
    const all = msg?.telemetry_data || {};
    for (const k in all) { Object.assign(srcTd, all[k]); }

    // 收集 spec 引用到的全部源字段，把本帧带到的值并进该成员快照
    const want = {};
    for (const out in spec) { if (spec[out].src) want[spec[out].src] = true; }
    const got = {}; let touched = false;
    for (const f in want) { if (srcTd[f] !== undefined && srcTd[f] !== null) { got[f] = srcTd[f]; touched = true; } }
    if (touched && msg && msg.eui) {
        const prev = (members[msg.eui] && members[msg.eui].v) || {};
        const seq  = (members[msg.eui] && members[msg.eui].ts) || 0;
        members[msg.eui] = { v: Object.assign({}, prev, got), ts: now != null ? now : seq + 1 };
    }

    const euis = Object.keys(members);
    const fresh = euis.filter(function (e) {
        if (now == null || staleMs <= 0) return true;
        const ts = members[e].ts;
        return ts != null && ts <= now && (now - ts) <= staleMs;
    });
    const num = function (x) { return (x != null && !isNaN(x)) ? Number(x) : null; };

    const out = {};
    for (const field in spec) {
        const op = spec[field].op, src = spec[field].src;
        if (op === "count_online") { out[field] = fresh.length; continue; }
        const pool = (op === "sum_cumul") ? euis : fresh;
        const vals = pool.map(function (e) { return num(members[e].v && members[e].v[src]); }).filter(function (x) { return x != null; });
        if (op === "avg")        out[field] = vals.length ? Number((vals.reduce(function (a, b) { return a + b; }, 0) / vals.length).toFixed(2)) : null;
        else if (op === "sum_snap" || op === "sum_cumul") out[field] = vals.length ? Number(vals.reduce(function (a, b) { return a + b; }, 0).toFixed(3)) : null;
        else if (op === "max")   out[field] = vals.length ? Math.max.apply(null, vals) : null;
        else if (op === "min")   out[field] = vals.length ? Math.min.apply(null, vals) : null;
        else if (op === "or")    out[field] = pool.some(function (e) { const x = members[e].v && members[e].v[src]; return x != null && x != 0; }) ? 1 : 0;
        else if (op === "count_on") out[field] = pool.filter(function (e) { const x = members[e].v && members[e].v[src]; return x != null && x != 0; }).length;
        else out[field] = null;
    }
    let result = { telemetry_data: out, server_attrs: { members: members }, shared_attrs: null };
    // ── rpcHook (设备对接通用规则) ──
    if (typeof RPCHelper.buildRpcHookAction === "function") {
      const __a = RPCHelper.buildRpcHookAction({ device, msg, thingModelId, idName: "yq01_emeter_asset_23113", name: "[YQ-23113-yq01资产] 区域聚合", parsed: { telemetry_data: result.telemetry_data, server_attrs: result.server_attrs, shared_attrs: result.shared_attrs } });
      if (__a) { result.actions = result.actions || []; result.actions.push(__a); }
    }
    return result;
}

// --- local debug ---（两台成员先后上报；平台会把返回的 members 持久化回 device，这里手动模拟）
const agg_spec = {
  "zone_voltage_a_avg": {
    "op": "avg",
    "src": "voltage_a"
  },
  "zone_voltage_b_avg": {
    "op": "avg",
    "src": "voltage_b"
  },
  "zone_voltage_c_avg": {
    "op": "avg",
    "src": "voltage_c"
  },
  "zone_current_a_sum": {
    "op": "sum_snap",
    "src": "current_a"
  },
  "zone_current_b_sum": {
    "op": "sum_snap",
    "src": "current_b"
  },
  "zone_current_c_sum": {
    "op": "sum_snap",
    "src": "current_c"
  },
  "zone_active_power_sum": {
    "op": "sum_snap",
    "src": "active_power"
  },
  "zone_energy_import_sum": {
    "op": "sum_cumul",
    "src": "energy_import"
  },
  "min_battery": {
    "op": "min",
    "src": "battery"
  },
  "min_rssi": {
    "op": "min",
    "src": "rssi"
  },
  "min_snr": {
    "op": "min",
    "src": "snr"
  },
  "online_count": {
    "op": "count_online",
    "src": ""
  }
};
const device = { name: "YQ-23113-yq01资产-1", server_attrs: { agg_spec, stale_ms: 1800000, members: {} } };
const r1 = payload_parser(device, { eui: "MEMBER_A", telemetry_data: { m1: {"voltage_a":1,"voltage_b":1,"voltage_c":1,"current_a":1,"current_b":1,"current_c":1,"active_power":1,"energy_import":1,"battery":1,"rssi":1,"snr":1} } }, "tmid", { telemetry_data: true });
device.server_attrs.members = r1.server_attrs.members;            // 平台持久化
console.log("成员A上报后:", JSON.stringify(r1.telemetry_data));
const r2 = payload_parser(device, { eui: "MEMBER_B", telemetry_data: { m1: {"voltage_a":2,"voltage_b":2,"voltage_c":2,"current_a":2,"current_b":2,"current_c":2,"active_power":2,"energy_import":2,"battery":2,"rssi":2,"snr":2} } }, "tmid", { telemetry_data: true });
device.server_attrs.members = r2.server_attrs.members;
console.log("成员B上报后(2台聚合):", JSON.stringify(r2.telemetry_data));
void PayloadParser;

Thing Model: [YQ01-MCB]

id_name: yq01_mcb_23113 · ID: 111754943676706816

javascript

import { Buffer } from 'buffer'
import {PayloadParser, RPCHelper} from '#tklHelper'

// 帧布局（含2个大地址跳跃分隔字节，dataLen=24，待实机验证）:
// [0]=0x87  [1]=0x03(MCB)  [2]=covStatus  [3]=status  [4]=battery  [5]=addr(0x02)
// [6..7]   reg256  A相电压    ×0.01 V
// [8..9]   reg259  A相电流高位
// [10..11] reg260  A相电流低位 ×0.01 A  (与reg259组成UINT32)
// [12..13] reg281  总有功功率高位（有符号）
// [14..15] reg282  总有功功率低位 ×0.01 kW (与reg281组成INT32)
// [16]     分隔字节（reg282→reg515 跨度233）
// [17..18] reg515  运行状态
// [19]     分隔字节（reg515→reg770 跨度255）
// [20..21] reg770  正向总有功电能低位
// [22..23] reg771  正向总有功电能高位 ×0.01 kWh (与reg770组成UINT32)

function payload_parser(device, msg, thingModelId, noticeAttrs, org_params) {
    let frameInfo = {
        port: 22,
        dataLen: 24,
        rssi: true,
        status: 3,
        battery: 4,
        tagList: [
            { index: 0, tag: 0x87 },
            { index: 1, tag: 0x03 }
        ]
    }
    let appInfo = [
        { name: "A相电压", field_name: "voltage_a", unit: "V", index: 6, type: "uint16be", decimal: 2, coefficient: 0.01 }
    ]

    let payParser = new PayloadParser({ device, msg, frameInfo, appInfo })
    let tdata = payParser.telemetry()
    if (tdata === null) return null
    if ((tdata?.status & 0x02) === 0x02) {
        const status = tdata.status
        tdata = { ...(device.telemetry_data?.[thingModelId] ?? {}) }
        tdata.status = status
        tdata._modelName = "yq01_mcb_23113"
        return { telemetry_data: tdata, server_attrs: null, shared_attrs: null }
    }

    const buf = Buffer.from(msg?.userdata?.payload, "base64")

    // A相电流：高位 reg259[8..9]，低位 reg260[10..11]
    tdata.current_a = Number(((buf.readUInt16BE(8) * 65536 + buf.readUInt16BE(10)) * 0.01).toFixed(2))
    // 总有功功率：高位 reg281[12..13]（有符号），低位 reg282[14..15]，单位 kW
    tdata.active_power = Number(((buf.readInt16BE(12) * 65536 + buf.readUInt16BE(14)) * 0.01).toFixed(2))
    // 运行状态：reg515[17..18]（byte16 为分隔字节）
    tdata.run_status = buf.readUInt16BE(17)
    // 正向总有功电能：低位 reg770[20..21]，高位 reg771[22..23]（byte19 为分隔字节）
    tdata.energy_import = Number(((buf.readUInt16BE(22) * 65536 + buf.readUInt16BE(20)) * 0.01).toFixed(2))

    tdata._modelName = "yq01_mcb_23113"
    let result = { telemetry_data: tdata, server_attrs: null, shared_attrs: null };
    // ── rpcHook (设备对接通用规则) ──
    if (typeof RPCHelper.buildRpcHookAction === "function") {
      const __a = RPCHelper.buildRpcHookAction({ device, msg, thingModelId, idName: "yq01_mcb_23113", name: "[YQ01-MCB]", parsed: { telemetry_data: result.telemetry_data, server_attrs: result.server_attrs, shared_attrs: result.shared_attrs } });
      if (__a) { result.actions = result.actions || []; result.actions.push(__a); }
    }
    return result;
}

console.log(payload_parser(
    {},
    {
        "if": "loraWAN",
        "gwrx": [{ "eui": "5a53012a000007da", "chan": 0, "lsnr": 9.5, "rfch": 1, "rssi": -65,
                   "time": "2026-05-26T10:00:00.000Z", "tmms": 0, "tmst": 0, "ftime": 0 }],
        "type": "data", "token": 1,
        "moteTx": { "codr": "4/5", "datr": "SF7BW125", "freq": 924.2, "modu": "LORA", "macAck": "", "macCmd": "" },
        "geoInfo": { "type": "gw:ip", "accuracy": 10000, "altitude": 0, "latitude": 22.36497, "longitude": 114.12677 },
        "moteeui": "0000000000000002",
        "version": "3.0",
        "userdata": {
            "adr": false, "port": 22, "class": "ClassC", "seqno": 1,
            "payload": "hwMAAAACWUwAAAH0AAAAZwAAAQAAZAAA",
            "confirmed": false
        }
    },
    "1",
    { telemetry_data: true },
    {}
))

物模型字段定义

物模型	字段	类型	单位	名称
yq01_emeter_23113	voltage_a	number	V	Phase A Voltage
yq01_emeter_23113	voltage_b	number	V	Phase B Voltage
yq01_emeter_23113	voltage_c	number	V	Phase C Voltage
yq01_emeter_23113	current_a	number	A	Phase A Current
yq01_emeter_23113	current_b	number	A	Phase B Current
yq01_emeter_23113	current_c	number	A	Phase C Current
yq01_emeter_23113	active_power	number	W	Total Active Power
yq01_emeter_23113	energy_import	number	kWh	Import Active Energy
yq01_emeter_23113	battery	number	v	Battery
yq01_emeter_23113	rssi	number	dBm	RSSI
yq01_emeter_23113	snr	number	dB	SNR
yq01_emeter_asset_23113	zone_voltage_a_avg	number	V	Zone Phase A Voltage
yq01_emeter_asset_23113	zone_voltage_b_avg	number	V	Zone Phase B Voltage
yq01_emeter_asset_23113	zone_voltage_c_avg	number	V	Zone Phase C Voltage
yq01_emeter_asset_23113	zone_current_a_sum	number	A	Zone Phase A Current
yq01_emeter_asset_23113	zone_current_b_sum	number	A	Zone Phase B Current
yq01_emeter_asset_23113	zone_current_c_sum	number	A	Zone Phase C Current
yq01_emeter_asset_23113	zone_active_power_sum	number	kW	Zone Total Active Power
yq01_emeter_asset_23113	zone_energy_import_sum	number	kWh	Zone Import Active Energy
yq01_emeter_asset_23113	min_battery	number	v	Zone Battery
yq01_emeter_asset_23113	min_rssi	number	dBm	Zone RSSI
yq01_emeter_asset_23113	min_snr	number	dB	Zone SNR
yq01_emeter_asset_23113	online_count	number		Zone Online Count
yq01_mcb_23113	voltage_a	number	V	Phase A Voltage
yq01_mcb_23113	current_a	number	A	Phase A Current
yq01_mcb_23113	active_power	number	kW	Total Active Power
yq01_mcb_23113	run_status	number		Run Status
yq01_mcb_23113	energy_import	number	kWh	Import Active Energy
yq01_mcb_23113	battery	number	v	Battery
yq01_mcb_23113	rssi	number	dBm	RSSI
yq01_mcb_23113	snr	number	dB	SNR

RPC 参数定义

无 RPC 入参模板。

触发器定义

无项目专用触发器。

第三方平台数据订阅

MQTT Topic: /v32/{Organization Account}/tkl/up/telemetry/{eui}

json

{
  "eui": "6353012af10a9331",
  "active_time": "2026-07-13T08:35:48.000Z",
  "thingModelId": "Use the platform model ID from the model inventory",
  "thingModelIdName": "Use the current telemetry model id_name",
  "telemetry_data": {
    "snr": 13.5,
    "rssi": -51,
    "battery": 3.37,
    "voltage_a": 1,
    "voltage_b": 2,
    "voltage_c": 3,
    "current_a": 4,
    "current_b": 5,
    "current_c": 6,
    "active_power": 7,
    "energy_import": 8
  }
}

模板选择与验证

在 ThinkLink 平台按项目名称、业务代码或模型清单中的 id_name、ID 搜索并绑定模型。部署后使用真实上行帧核对字段、单位、RPC 和触发器行为。

补充说明

需求与决策依据：requirement/requirements.md。

LoRaWAN 网关

应用笔记

LoRaWAN EB 采集器

LoRaWAN 传感器

平台

网络服务器

设备

农业传感器

BMS

定制设备

工业设备

门思传感器

仪表

23113-yq01 对接文档

传感器简介

模型清单

产品特点与适用范围

部署与采集信息

遥测与寄存器定义

参数定义

Requirements 证据

EdgeBus 代码

物模型与 RPC 代码

Thing Model: [YQ01-EMETER]

Thing Model: [YQ-23113-yq01资产] 区域聚合

Thing Model: [YQ01-MCB]

物模型字段定义

RPC 参数定义

触发器定义

第三方平台数据订阅

模板选择与验证

补充说明

LoRaWAN 网关

应用笔记

LoRaWAN EB 采集器

LoRaWAN 传感器

农业传感器

BMS

定制设备

工业设备

门思传感器

仪表

23113-yq01 对接文档 ​

传感器简介 ​

模型清单 ​

产品特点与适用范围 ​

部署与采集信息 ​

遥测与寄存器定义 ​

参数定义 ​

Requirements 证据 ​

EdgeBus 代码 ​

物模型与 RPC 代码 ​

Thing Model: [YQ01-EMETER] ​

Thing Model: [YQ-23113-yq01资产] 区域聚合 ​

Thing Model: [YQ01-MCB] ​

物模型字段定义 ​

RPC 参数定义 ​

触发器定义 ​

第三方平台数据订阅 ​

模板选择与验证 ​

补充说明 ​

23113-yq01 对接文档

传感器简介

模型清单

产品特点与适用范围

部署与采集信息

遥测与寄存器定义

参数定义

Requirements 证据

EdgeBus 代码

物模型与 RPC 代码

Thing Model: [YQ01-EMETER]

Thing Model: [YQ-23113-yq01资产] 区域聚合

Thing Model: [YQ01-MCB]

物模型字段定义

RPC 参数定义

触发器定义

第三方平台数据订阅

模板选择与验证

补充说明